Exterior House Decor Wall Hanging - 4.5D Dutch Lap Vinyl Siding Board Pvc Exterior Pvc Wall Paneling – Marlene

Place of Origin:Shanghai, China

Brand Name:Marlene

Material:PVC, PVC+Calcium

Thickness:0.9mm, 1.0mm, 1.1mm,1.2mm, 1.3mm,

Size:25.4cm or 22.9cm or 20.32cm Effective Width

Processing Service:Cutting, Moulding

Product name:10 Inch 5D DL Dutch Lap Vinyl Siding Panel Board American Lap For Wall

Keyword:10 Inch 5D DL Dutch Lap Vinyl Siding Panel Board American Lap For Wall

Color:26 Colors for choosen and accept customization

Usage:Office Building, Hospital,Supermarket,Warehouse,Workshop, etc Decor

MOQ:500 sqm and some color has stocks

Payment:L/C, T/T, Western Union, MoneyGram, Cash, Paypal

Package:14pcs / Kraft paper, Carton Packing Optional

Supply Ability600 Ton/Tons per YearPackaging & DeliveryPackaging Details

Conventional packaging: 14pcs / Kraft paper ;Carton Packing AvailablePortNingbo/ShanghaiPicture Example:

Lead Time:

10 Inch 5D DL Dutch Lap Vinyl Siding Panel Board American Lap For Wall

Product Information

Product Characteristics

PVC Vinyl Siding Installation

4.J Chanel and installation around Door and Window
(1)When installing J Chanel around window, need to calculate the length and width first
Length=Window Width+2*J Channel width.And make J channel and vinyl siding on same plane.Cut off the upside of the J channel.Length is same asJchannel width
(2) If window is round shape, installation is same method as normal oneWhen install it. use heater to make it the
same angle as the window
(3)When installing J channel for the door,cut two J Channel on the two sides and one on the top.All the process
and method are same asthe window.
(4)J channel around air conditioner and balcony can use same way to install J Channel
(5)For other instructions,such as nail distance,joint or accessories distance,please refer to former accessories

6.PVCViny Siding Panel
(1) Install first vinyl siding on the start strip.Make sure that vinyl siding pane and start strip lock up well.
(2)Screws or nails should be installed in the middle of the slots and should not be too tight. Make sure that the viny
siding can move from left to right and also the reverse direction.Usually 15-20 cm we install one nail or screw.
(3)Length of vinyl siding should be 0.3 inch shorter than distance of accessoriesgrooves. In this way,it can prevent
from the damage or deformation brought by contraction and expansion.
(4)When jointing vinyl siding panel together,make sure that each two has 2 inch distance from each other. And also
keep joint parts away from exits or air vent.
(5) Every 4 panels,check if vinyl siding is horizontal.If notadjust them.And don’t pull it up or down after installation(6)Vinvl sidina need to be cuttina when meet obstructions.such as windowdrainae svstem or exhaust system.